FAS Series

  • Crimp Cable Type
  • top_rosh.gif
1.5mm Pitch Drawer Connector / Crimping Termination for Assembly

FAS Series is 1.5mm pitch drawer connector, and it offers prevention of buckling of the contact pins, easy adjustment of the mating position, reduction of the stress when mating and highly reliable connection. KEL recently developed this product as a smaller version of the FA Series, which was released earlier, and has launched sales of the FAS Series. The FAS Series inherits the features of the FA Series.

Its sufficient amount of floating (±1.4mm Max. to X and Y directions) reduces the stress occurs in mated condition.
Additionally it has a structure to absorb ±3mm gap in X and Y directions when mating.
In this structure, contact pins do not touch until both receptacle and plug become straight in order to prevent the buckling.

For the concept of contact mechanism, twin-leaf pinching 2 point contact structure which is well acknowledged for our battery connector GF series is adopted.

The effective mating length of the FAS Series is 3.4mm.

The current rating is 2.5A, and AWG24 to 28 cables are applicable. There are eight types of variations in the number of pins, from 4 to 40 pins. KEL intends to expand the variations to meet market needs in the future.

This product is genuinely a small-size high-performance drawer connector. The FAS Series has almost the same specifi cations as the FA Series except for some electrical characteristics.

Features & Specifications

Features

・Downsized by more than 30% compared to our FA Series.

・Absorbs ±3mm gap in X and Y directions when mating.

・Floating structure of the screwed area enables ±1.4mm displacement in X and Y directions in mated condition.

・Highly reliable design with effective contact displacement of 3.4mm(0.134").

・With a twin-leaf pinching 2 point contact structure adopted as a contact mechanism, improved reliability based on stable contact performance is ensured.

・Applicable to Hot swap is available.

Specifications
Insulator material Glass-filled PBT(UL94V-0), Black
Contact material [FAS01]Copper alloy
[FAS11]Brass
Contact plating [FAS01] (Contact area)]Gold over Nickel
(Crimping area)Tin over Nickel
[FAS11] Gold over Nickel
Washer / Rivet material Stainless steel
Dielectric withstanding voltage 650V AC for 1 minute
Current rating 2.5A per contact
(Up to 3A under certain conditions)
Contact resistance 30mΩ max.
Insulation resistance 1,000MΩ min. at 500V DC
Operating temperature -40℃ to +85℃
Durability of insertion and withdrawal 2,000 times
Recommended cable Discrete wire cables AWG #24/26/28
(outer diameter of cable coating: φ0.88 to φ1.11 mm)

Download Documents

Catalog
Mating Matrix
Product Table

Products List

 
Products List:58Hits.
Part Number Description
#597 1.5mm pitch drawer connector. Contact terminal for FAS01 receptacle. AWG#26, AWG#28
#597-1 1.5mm pitch drawer connector. Contact terminal for FAS01 receptacle. AWG#24
#597D 1.5mm pitch drawer connector. Contact terminal for FAS01 receptacle. AWG#26, AWG#28, 0.25μm min. Gold plating
#597D-1 1.5mm pitch drawer connector. Contact terminal for FAS01 receptacle. AWG#24, 0.25μm min. Gold plating
#615 1.5mm pitch drawer connector. Contact terminal for FAS12 cable plug for cable to cable. AWG#26, AWG#28
#615-1 1.5mm pitch drawer connector. Contact terminal for FAS12 cable plug for cable to cable. AWG#24
#615-2 1.5mm pitch drawer connector. Contact terminal for FAS12 cable plug for cable to cable. AWG#26, AWG#28
#615-3 1.5mm pitch drawer connector. Contact terminal for FAS12 cable plug for cable to cable. AWG#24
#615-4 1.5mm pitch drawer connector. Contact terminal for FAS12 cable plug for cable to cable. AWG#26, AWG#28
#615-5 1.5mm pitch drawer connector. Contact terminal for FAS12 cable plug for cable to cable. AWG#24
Products list:58Hits.

Contact us & Support