HomeProduct informationFA Series

FA Series

2.5mm Pitch Drawer Connector. Crimping termination for assembly.
photo- FA Series is 2.5mm pitch drawer connector, and it offers prevention of buckling of the contact pins, easy adjustment of the mating position, reduction of the stress when mating and highly reliable connection.

Its sufficient amount of floating (±1.4mm Max. to X and Y directions) reduces the stress occurs in mated condition. Additionally it has a structure to absorb ±3mm gap in X and Y directions when mating. In this structure, contact pins do not touch until both receptacle and plug become straight in order to prevent the buckling.

For the concept of contact mechanism, twin-leaf pinching 2 point contact structure which is well acknowledged for our battery connector GF series is adopted.
The current rating is 3A, and AWG22 to 26 cables are applicable. Both board to cable type and cable to cable type are available, and 8 to 40 pin counts are available for a wide range of usage. (Available pin count differs according to the connector type.)

Features

  • 2.5mm pitch drawer connector.
  • Receptacle (FA01 : Cable side connector), Plug (FA11 : PCB side connector) and Cable plug (FA12 : Cable side connector for cable to cable) are available and can accommodate a wide range of usage.
  • Absorbs ±3mm gap in X and Y directions when mating.
  • Floating structure of the screwed area enables ±1.4mm displacement in X and Y directions in mated condition.
  • Highly reliable design with effective contact displacement of 3mm.
  • Crimping termination for cable assembly.
  • #22 AWG, #24 AWG and #26 AWG are applicable.
  • Dust resistant twin-leaf pinching 2 point contact structure.
  • Live insertion and withdrawal type available.
  • A structure to prevent miss insertion.
  • Rich pin count variations.
    Cable side connector (FA01) : 8, 10, 12, 14, 16, 18, 20, 22, 24, 32 and 40 pins.
    PCB side connector (FA11) : 8, 10, 12, 14, 16, 18, 20, 22, 24 and 32 pins.
    Cable plug for cable to cable (FA12) : 8, 20, 24, 38 and 40 pins.
  • RoHS compliance.

Specifications

Insulator material Glass-filled PBT (UL94V-0), Black
Contact material Copper alloy
Contact plating Gold over Nickel (Contact / Terminal area)
Tin over Nickel (Crimping area)
Washer / Rivet material Stainless steel
Current rating 3A per contact
Contact resistance 30mΩ max.
Dielectric withstanding voltage 650AC for 1 minute
Insulation resistance 1,000MΩ min. at 500V DC
Operating temperature -40°C to +85°C
PDF