As the volumes of data handled by complex devices continue to grow, so too does the demand for even higher speeds of data transmission between units within the same casing. Meanwhile, casings themselves are also shrinking in size, elevating even further the need for smaller mounting components. Against this backdrop, KEL is currently planning to release the DJ40/50 Series of 1-mm pitch, I/O connectors, characterized by a design approximately 30% smaller than that of conventional connectors of the same pitch. We have provided the cable-side connector with a plastic cover, and metal is used in the interior as an EMI countermeasure. What`s more, measures such as the use of screw lock technology to increase fixing force ensure that the connectors of this series are extremely easy to use and provide a solution to highly varied needs.

Insulator material	Glass-filled 66 Nylon (UL94V-0),Black
Alignment plate material	[DJ5X Series] Glass-filled 66 Nylon (UL94V-0), Black [DJ40 Series] Glass-filled 6T Nylon (UL94V-0), Black
Assembly cover material	[DJ40 Series] Glass-filled 66 Nylon (UL94V-0), Black
Contact material	Copper alloy
Contact plating	Contact area : Gold over Nickel Terminal area : Tin copper over Nickel IDC area : Gold over Nickel
Shell material	Steel
Shell plating	Nickel over Copper alloy
Inner cover material	Steel
Inner cover plating	Nickel over Copper alloy
outer cover material	Glass-filled PPO (UL94V-0), Gray
Screw lock material	Steel
Screw lock plating	Nickel
Mounting hook materials	Copper alloy
Mounting hook plating	Tin copper over Nickel
Hexagon nut material	Steel
Hexagon nut plating	Nickel
Jack post material	Steel
Jack post plating	Nickel
Current rating	0.5A per contact
Contact resistance	40mΩ max.(Except for the cable resistance)
Dielectric withstanding voltage	300V AC for 1 minute
Insulation resistance	1000MΩ min. at 500V DC